China Low Speed High Torque Heavy Duty 24V 48V Robot Electric Drive Wheel and BLDC Motor motorbase

Solution Description

Solution Description

Planetary Gearbox Wheel Drive Dimension Drawing:

Motor Dimensions Drawing:

Motor Specification:

Rated Output(Kw)

.four

Variety of Poles

10

Rated Voltage(V)

DC48

Vibration Class

F

Rated Velocity(rpm)

3000

Max. Speed(rpm)

3200

Rated Current(Arms)

11±10%

Instantaneous Max. Recent(Arms)

22±10%

Rated Torque(N.m)

1.27

Instantaneous CZPT Torque(N.m)

two.fifty four

Line Resistance(Ω)

.27±10%(25ºC)

Line Inductance(mH)

.56±10%

Line Back again EMF.(V/krpm)

6.9±10%

Torque Coefficient(N.m/A)

.11±10%

Rotor Minute of Inertia(Kg.m2×10-4)

.58±10%

Opinions Part

Incremental Encoder, 2500PPR

Insulation Resistance(MΩ)

DC500V,>20MΩ

Sounds(dB)

≤60dB, None Unique Sounds

Time rating

Ongoing

Vibration Class

V 15

Ambient Temperature

-twenty~+40ºC

Ambient Humidity

twenty~eighty% No Condensation

Excitation

Long lasting Magnet

Mouting

Flange Method

Generate Method

Immediate Drive

Fat(Kg)

one.35

Enclosure

Entirely Enclosed, Self-cooled, IP65(apart from for shaft opening)

Rotation Direction

Counterclockwise(CCW)

Planetary Gearbox Specification:

Type Planetary Gearbox
Gear Ratio(i) sixteen twenty twenty five 28 35 forty fifty 70
Gearbox Torque(N.m) 30 33 33 33 33 33 33 21.five
Polyurethane load-bearing(kg) 400 Hardness 90±5A
Rubber load-bearing(kg) 350 Hardness 70-75A
Peak Velocity(M/min) 94.two seventy five.four sixty.3 53.eight forty three.1 37.7 thirty.one 21.5
Traction(N) 228.six 285.eight 357.2 four hundred.1 five hundred.1 571.5 714.4 787.five
Towing fat(reference) 434.three 542.9 678.seven 760.one 950.one 4085.nine 1357.3 1496.three
Excess weight(kg) About 5

For Far more Information Of Merchandise Requirements,
Please Click here get in touch with us for updated measurement drawing if you have other various parameter needed. Many thanks

Far more Flange Dimensions

 

BLDC Motor with Gearbox Selection

 

 

Organization Profile

 

DMKE motor was launched in China, HangZhou city,Xihu (West Lake) Dis. district, in 2009. Following 12 years’ creativeness and advancement, we became 1 of the foremost substantial-tech businesses in China in dc motor market.

We specialize in substantial precision micro dc equipment motors, brushless motors, brushless controllers, dc servo motors, dc servo controllers etc. And we make brushless dc motor and controller with vast energy assortment from 5 watt to 20 kilowatt also dc servo motor electricity assortment from 50 watt to ten kilowatt. They are widely employed in automated guided vehicle , robots, lifting equipment,cleaning device, health-related products, packing machinery, and several other industrial computerized equipments.

With a plant spot of 4000 square meters, we have developed our very own source chain with higher top quality control regular and passed ISO9001 certification of high quality system.

With far more than ten engineers for brushless dc motor and controllers’ analysis and development, we own sturdy unbiased design and improvement capability. Custom-made motors and controllers are widely approved by us. At the very same time, we have engineers who can converse fluent English. That helps make we can provide intime after-product sales help and advice smoothly for our buyers.

Our motors are exported throughout the world, and above eighty% motors are exported to Europe, the United States, Saudi Arabia, Australia, Korea etc. We are searching forward to setting up long-term company partnership jointly with you for mutual company achievement.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FAQ

Q1: What type motors you can give?
A1: For now, we mainly offer permanent magnet brushless dc motor, dc gear motor, micro dc motor, planetary gear motor, dc servo motor, brush dc motors, with diameter range from 16 to 220mm,and power selection from 5W to 20KW.

Q2: Is there a MOQ for your motors?
A2: No. we can settle for 1 pcs for sample creating for your tests,and the price tag for sample creating will have 10% to 30% difference than bulk price tag dependent on distinct style.

Q3: Could you deliver me a value list?
A3: For all of our motors, they are tailored primarily based on various requirements like power, voltage, equipment ratio, rated torque and shaft diameter and so on. The price tag also differs in accordance to different order qty. So it is difficult for us to supply a value checklist.
If you can share your comprehensive specification and order qty, we are going to see what offer we can offer.

This autumn: Are you motors reversible?
A4: Yes, practically all dc and ac motor are reversible. We have complex individuals who can educate how to get the function by different wire relationship.

Q5: Is it feasible for you to produce new motors if we offer the tooling expense?
A5: Yes. You should kindly share the in depth requirements like overall performance, size, annual amount, focus on price and so on. Then we will make our analysis to see if we can set up or not.

Q6:How about your supply time?
A6: For micro brush dc gear motor, the sample shipping and delivery time is 2-5 times, bulk supply time is about 15-twenty times, depends on the order qty.
For brushless dc motor, the sample produce time is about ten-fifteen days bulk time is 15-20 times.
Pleasecontact us for final reference.

Q7:What is your guarantee phrases?
A6: A single 12 months

 

Application: Universal, Industrial
Operating Speed: Low Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Closed Type
Number of Poles: 10

###

Samples:
US$ 600/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Rated Output(Kw)
0.4
Number of Poles
10
Rated Voltage(V)
DC48
Vibration Class
F
Rated Speed(rpm)
3000
Max. Speed(rpm)
3200
Rated Current(Arms)
11±10%
Instantaneous Max. Current(Arms)
22±10%
Rated Torque(N.m)
1.27
Instantaneous Peak Torque(N.m)
2.54
Line Resistance(Ω)
0.27±10%(25ºC)
Line Inductance(mH)
0.56±10%
Line Back EMF.(V/krpm)
6.9±10%
Torque Coefficient(N.m/A)
0.11±10%
Rotor Moment of Inertia(Kg.m2×10-4)
0.58±10%
Feedback Component
Incremental Encoder, 2500PPR
Insulation Resistance(MΩ)
DC500V,>20MΩ
Noise(dB)
≤60dB, None Special Noise
Time rating
Continuous
Vibration Class
V 15
Ambient Temperature
-20~+40ºC
Ambient Humidity
20~80% No Condensation
Excitation
Permanent Magnet
Mouting
Flange Method
Drive Method
Direct Drive
Weight(Kg)
1.35
Enclosure
Totally Enclosed, Self-cooled, IP65(except for shaft opening)
Rotation Direction
Counterclockwise(CCW)

###

Type Planetary Gearbox
Gear Ratio(i) 16 20 25 28 35 40 50 70
Gearbox Torque(N.m) 30 33 33 33 33 33 33 21.5
Polyurethane load-bearing(kg) 400 Hardness 90±5A
Rubber load-bearing(kg) 350 Hardness 70-75A
Peak Speed(M/min) 94.2 75.4 60.3 53.8 43.1 37.7 30.1 21.5
Traction(N) 228.6 285.8 357.2 400.1 500.1 571.5 714.4 787.5
Towing weight(reference) 434.3 542.9 678.7 760.1 950.1 4085.9 1357.3 1496.3
Weight(kg) About 5
Application: Universal, Industrial
Operating Speed: Low Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Closed Type
Number of Poles: 10

###

Samples:
US$ 600/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Rated Output(Kw)
0.4
Number of Poles
10
Rated Voltage(V)
DC48
Vibration Class
F
Rated Speed(rpm)
3000
Max. Speed(rpm)
3200
Rated Current(Arms)
11±10%
Instantaneous Max. Current(Arms)
22±10%
Rated Torque(N.m)
1.27
Instantaneous Peak Torque(N.m)
2.54
Line Resistance(Ω)
0.27±10%(25ºC)
Line Inductance(mH)
0.56±10%
Line Back EMF.(V/krpm)
6.9±10%
Torque Coefficient(N.m/A)
0.11±10%
Rotor Moment of Inertia(Kg.m2×10-4)
0.58±10%
Feedback Component
Incremental Encoder, 2500PPR
Insulation Resistance(MΩ)
DC500V,>20MΩ
Noise(dB)
≤60dB, None Special Noise
Time rating
Continuous
Vibration Class
V 15
Ambient Temperature
-20~+40ºC
Ambient Humidity
20~80% No Condensation
Excitation
Permanent Magnet
Mouting
Flange Method
Drive Method
Direct Drive
Weight(Kg)
1.35
Enclosure
Totally Enclosed, Self-cooled, IP65(except for shaft opening)
Rotation Direction
Counterclockwise(CCW)

###

Type Planetary Gearbox
Gear Ratio(i) 16 20 25 28 35 40 50 70
Gearbox Torque(N.m) 30 33 33 33 33 33 33 21.5
Polyurethane load-bearing(kg) 400 Hardness 90±5A
Rubber load-bearing(kg) 350 Hardness 70-75A
Peak Speed(M/min) 94.2 75.4 60.3 53.8 43.1 37.7 30.1 21.5
Traction(N) 228.6 285.8 357.2 400.1 500.1 571.5 714.4 787.5
Towing weight(reference) 434.3 542.9 678.7 760.1 950.1 4085.9 1357.3 1496.3
Weight(kg) About 5

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China Low Speed High Torque Heavy Duty 24V 48V Robot Electric Drive Wheel and BLDC Motor     motorbaseChina Low Speed High Torque Heavy Duty 24V 48V Robot Electric Drive Wheel and BLDC Motor     motorbase
editor by CX 2023-04-07