China supplier Ce Approved 0.12kw-315kw Y2 Series Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower vacuum pump brakes

Product Description

Introduction:

     Y2 series three-phase asynchronous motor is Y series motor the upgrading of product, is the totally enclosed, fan-cooled induction motor for general purpose .
It was the newest product in the 90S’ ,its overall level has reached the same products abroad at the beginning of 90S’level. The product apply to economic lake-off fields, such as machine tools, water pump, fan, compressor, also can be applied to transportation, stirring, printing, agricultural machinery, food and other kinds of excluding inflammable, explosive or corrosive gas.
     Y2 series three phase asynchronous motor installation size and power grade in conformity with relevant standards of IEC and Germany DIN42673 standard line and Y series motor, its shell protection grade for IP54, cooling method for IC41l, operate continuously (S1). Using F insulation class and grade B assessment according to temperature (except for 315 L2-2, 4355 all specifications F grade the assessment, and ask the assessment load noise index.
        Y2 series three-phase asynchronous motor the rated voltage is 380 V. rated frequency is 50 Hz. 3 KW the following connection is Y , other power are delta connection . Motor running the place at no more than 1000 m; Environment air temperature changes with seasons, but no more than 40 °C; Minimum environment air temperature is-15 °C; The wet month average high relative humidity is 90%; At the same time, this month is not higher than the lowest average temperature 25 °C.

 

 Motor Features:

1. Frame size:H56-355;
2. Power:0.12-315Kw;
3. Voltage: 380V;

4. Rated Frequency: 50 Hz / 60 Hz;

5. Poles: 2 / 4 / 6 / 8 / 10

6. Speed: 590 -2980 r/min

7. Ambient Temperature: -15°C-40°C 

8. Model of CONEECTION: Y-Connection for 3 KW motor or less while Delta-Connection for 4 KW motor or more;

9. Mounting:  B3; B5; B35; B14; B34; 

10. Current: 1.5-465 A (AC);

11. Duty: continuous (S1);

12. Insulation Class:  B;

13. Protection Class:  IP44,IP54,IP55;

14. Frame material: aluminum body(56-132 frame), cast iron(71-355 frame)

15. Terminal box : Top or Side 

16. Cooling Method: IC411 Standards;

17. Altitude: No more than 1,000 meters above sea level;

18. Packing: 63-112 frame be packaged by carton&pallets

                   132-355 frame be packaged by plywood case;

 

19. Certifications: CE, CCC, ISO9001: 2008

Company Introduction:

 

ZHangZhoug Yachan Electrical Machinery Co., Ltd. is a modern enterprise specializing in producing all kinds of small and medium motors. Its products mainly include Y, Y2 and IE2 series three-phase asynchronous motors, MS aluminum shell motors, YD series multi-speed motors, YCT series electromagnetic variable-speed motors, YVP variable-frequency and variable-speed motors, YEJ electromagnetic braking three-phase asynchronous motors, YC/YCL and YL single-phase series motors, JY single-phase asynchronous motors and MY/ML aluminum shell single-phase asynchronous motors. The company is located in Lianshu Industrial Zone, HangZhou, next to National Highway 104, Xihu (West Lake) Dis. Airport and Xihu (West Lake) Dis. Port, enjoying very convenient sea, land and air transportation. Since its inception, the company consistently adheres to the policy of “Develop Technology to Expand Market, Enhance Quality to Create Brand, Strictly Manage to Increase Benefit, and Based on Integrity to Be World-renowned”, and insists on first-class quality to create first-class enterprise.

 

 

 Factory Advantages

 

1 . 15 years history

 

2. Competitive Price

 

3. Guaranteed Quality 

 

4. Fast delivery time, Normal models about 15-20days , another not normal models need about 30days

 

5. 100% testing after each process and final testing before packing ,all raw material is good quality .100% cooper wire, Cold-rolled silicon steel sheet,good quaility shafts ,bearings,stators ,fan,fan covers.and so on.

 

6. High efficiency

 

7. Low noise 

 

8. Long life

 

9. Power saving

 

10. Slight vibration

 

11. It is newly designed in conformity with the relevant rules of IEC standards, Strictly and Perfect Management is guaranteed for Production ;

 

12. Professional Service

 

13. Warranty: 12 months from date of delivery

 

14. Main Market: South America, Middle East, Southest Asia, Europe,Africa and so on  

 

 

15. We have Certification for CE, CCC, ISO9001,High quality and competitive price !
 

   Y2 Three-phase Asynchronous Electric Motor
1). Power:  0.12KW-315KW;
2). Frame:  H56 to 355;
3). Shell:   cast iron body , aluminum body ;
4). Pole:  2/4/6/8 poles;
5). Mounting arrangement:  B3/B5/B14/B35/B34 or other;
6). Voltage:   220V, 380V, 400V, 415V, 440V or on request (50Hz or 60Hz);
7). Protection class:  IP54 / IP55 /IP65;
8). Duty/Rating:  S1 (Continuous);
9). Cooling method:   IC411 (SELF-FAN cooling);
10). Insulation class:   F;
11).Standard:  (IEC) EN60034-1 & EN1065714-1.

Company Introduction & Production Process


YACHAN CERTIFICATION

Our Service:

 

1. We valuing every customer.

 

2. We cooperate with customer to design and develop new product. Provide OEM.

 

 

3. 25-30 days leading time.

 

4. We’d like to assist you arranging delivery things, test things or others on your request.

 

 

Why us?

 

1. Our Manufacturer is a professional factory for Electric Motor in China

 

2. Have good price in China

 

3. Full of export experiences.

 

4. 100% tested for the quality prior to shipment

 

5. Special motors can be designed according to customers’ requirements

 

6. Perfect performance, low noise, slight vibration, reliable running, good appearance, small volume, light weight and easy maintenance.

 

7. Reliable in country, city or factory environments

 

8. Very low power consumption

 

9. Superior life

 

10. The standards conforms to the IEC international standard

 

11. Sincere and Professional Service

 

FAQ:

 

Q: What is the payment terms?

 

A: 30% T/T in advance, 70% before shipment, L/C at sight, Western Union or Paypel

 

 

Q: What is your delivery time?

 

A: Within 25-30 days after receiving deposit. 

 

 

Q: Do you offer OEM service?

 

A: Yes. We accept OEM service.

 

 

Q: What is your MOQ of this item ?

 

A: 5 PCS per item.  

 

 

Q: Can we type our brand on it?

 

A: Yes of course.

 

 

Q: Where is your loading port ?

 

A: HangZhou Port, ZheJiang Port, China.

 

 

Q: What is your production capacity?

 

A: About 500 PCS per day.

 

 

 

 

Application: Industrial
Speed: Variable Speed
Number of Stator: Three-Phase
Function: Driving
Casing Protection: Protection Type
Number of Poles: 2
Samples:
US$ 97/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

3 phase motor

What is a 3-phase motor and how does it work?

A 3-phase motor is a type of electric motor that operates on a three-phase power supply. It is widely used in various industrial and commercial applications due to its efficiency, reliability, and ability to provide high torque output. Here’s a detailed explanation of what a 3-phase motor is and how it works:

A 3-phase motor consists of three windings, typically placed 120 degrees apart around the motor’s stator. These windings are energized by a balanced three-phase power supply, which generates a rotating magnetic field within the motor. The rotating magnetic field interacts with the motor’s rotor, causing it to rotate and produce mechanical power.

Here’s a step-by-step explanation of how a 3-phase motor works:

  1. Power Supply: A 3-phase motor requires a three-phase power supply, which typically consists of three alternating current (AC) voltage waveforms that are 120 degrees out of phase with each other. The power supply is connected to the motor’s three windings.
  2. Stator Windings: The stator windings are coils of wire that are wound around the motor’s stator. Each winding is connected to a different phase of the power supply. When the power supply is energized, alternating current flows through each winding, creating a magnetic field around the stator.
  3. Rotating Magnetic Field: The three-phase current flowing through the stator windings creates a rotating magnetic field. The rotating magnetic field is produced because the three phases are out of phase with each other by 120 degrees. This rotating magnetic field is responsible for the motor’s operation.
  4. Rotor: The rotor is the rotating part of the motor. It is typically made of a series of conductive bars or laminated iron cores. The rotor is placed within the rotating magnetic field created by the stator windings.
  5. Induction or Synchronous Operation: Depending on the design of the motor, it can operate as an induction motor or a synchronous motor.
    • Induction Motor: In an induction motor, the rotating magnetic field induces currents in the rotor bars through electromagnetic induction. These induced currents create a magnetic field in the rotor that interacts with the stator’s rotating magnetic field, causing the rotor to rotate. The speed at which the rotor rotates is slightly slower than the speed of the rotating magnetic field, creating a slip. The slip allows the motor to produce torque and overcome inertia or mechanical load.
  6. Mechanical Power Output: As the rotor rotates within the rotating magnetic field, it generates torque. The torque produced by the motor can be used to drive mechanical loads, such as pumps, fans, compressors, conveyors, or machinery. The motor’s speed and torque output can be controlled by adjusting the frequency or voltage of the three-phase power supply, or by implementing control strategies within the motor’s control system.

Overall, a 3-phase motor is a versatile and efficient motor that operates on a three-phase power supply. It works by creating a rotating magnetic field in the motor’s stator through energized windings. This rotating magnetic field interacts with the rotor, causing it to rotate and generate mechanical power. Whether it operates as an induction motor or a synchronous motor, the 3-phase motor is widely used in various industrial applications due to its reliable and high-performance characteristics.

3 phase motor

How do 3-phase motors contribute to the efficiency of industrial processes?

3-phase motors play a significant role in enhancing the efficiency of industrial processes. Here’s a detailed explanation of how these motors contribute to improved efficiency:

  • Power-to-Weight Ratio: 3-phase motors offer a high power-to-weight ratio, making them compact and lightweight compared to other motor types. This characteristic allows for more efficient use of space and facilitates easier installation and transportation in industrial settings.
  • High Torque Output: 3-phase motors are known for their high torque output, enabling them to efficiently drive heavy loads and handle demanding industrial applications. The high torque capability ensures that motors can start and accelerate loads quickly and effectively, minimizing time and energy wastage.
  • Efficient Power Conversion: 3-phase motors convert electrical power into mechanical power with high efficiency. Compared to single-phase motors, 3-phase motors experience less power loss, deliver smoother operation, and have higher power factor values. This efficient power conversion contributes to energy savings and reduces operating costs.
  • Variable Speed Control: Many 3-phase motors are equipped with variable frequency drives (VFDs) or adjustable speed drives (ASDs). These devices allow for precise control of motor speed and torque, enabling optimal matching of motor output to the requirements of the industrial process. By adjusting the motor speed to match the load, energy consumption can be minimized, resulting in improved efficiency.
  • Multiple Starters and Reversibility: 3-phase motors support multiple starters, allowing for convenient control of motor operation and integration into complex industrial systems. Additionally, these motors can easily be reversed, enabling bi-directional operation. This flexibility enhances process efficiency by accommodating different operational modes and facilitating seamless integration into various applications.
  • Reliability and Durability: 3-phase motors are known for their robust construction and high reliability. They are designed to withstand the demanding conditions of industrial environments, including high temperatures, vibrations, and varying loads. The reliability and durability of these motors contribute to uninterrupted operation, reduced downtime, and improved overall process efficiency.
  • Compatibility with Automation: 3-phase motors are well-suited for integration into automated industrial systems. They can easily be controlled and monitored through programmable logic controllers (PLCs) or other automation technologies. This compatibility with automation enables precise coordination of motor operation with other process variables, optimizing efficiency and productivity.
  • Wide Range of Applications: 3-phase motors find application in a wide range of industrial processes, including pumps, compressors, conveyors, fans, mixers, and more. Their versatility and adaptability make them suitable for various industries, from manufacturing and production to mining, oil and gas, and HVAC systems. By providing reliable and efficient power to drive these processes, 3-phase motors contribute to improved overall industrial efficiency.

Overall, 3-phase motors offer numerous advantages that enhance the efficiency of industrial processes. Their compact design, high torque output, efficient power conversion, variable speed control, and compatibility with automation technologies make them a preferred choice for a wide range of industrial applications. By utilizing 3-phase motors, industrial processes can achieve higher energy efficiency, improved productivity, and overall cost savings.

3 phase motor

How do 3-phase motors handle variations in voltage and frequency?

3-phase motors are designed to handle variations in voltage and frequency within certain limits. Here’s a detailed explanation of how they handle these variations:

  • Voltage Variations:
    • 3-phase motors are typically designed to operate within a specific voltage range. As long as the applied voltage remains within this range, the motor can function properly.
    • When the voltage supplied to a 3-phase motor varies, the motor’s performance may be affected. If the voltage drops significantly below the rated voltage, the motor may experience reduced torque and power output. Conversely, if the voltage exceeds the rated value, the motor may draw excessive current, leading to overheating and potential damage.
    • To handle voltage variations, 3-phase motors often incorporate protective devices such as thermal overload relays or motor protection circuits. These devices can detect abnormal operating conditions caused by voltage fluctuations and take appropriate actions, such as shutting down the motor or reducing its load.
  • Frequency Variations:
    • The speed of a 3-phase motor is directly proportional to the frequency of the power supply. When the frequency deviates from the rated value, the motor’s speed and performance can be affected.
    • If the frequency increases, the motor’s speed will also increase, resulting in higher torque and power output. Conversely, a decrease in frequency will lead to a decrease in speed, resulting in reduced torque and power output.
    • 3-phase motors can handle frequency variations up to a certain extent. However, if the frequency deviates too far from the rated value, the motor’s performance may become unstable or it may fail to start altogether.
    • For precise control over motor speed, variable frequency drives (VFDs) can be used. VFDs can adjust the frequency of the power supply to the motor, allowing for precise speed control and compensation for frequency variations.
  • Voltage and Frequency Tolerance:
    • International standards specify the acceptable voltage and frequency tolerances for 3-phase motors. These standards ensure that motors can operate reliably and safely within specified voltage and frequency ranges.
    • Motor manufacturers often provide voltage and frequency tolerance specifications for their products. These specifications indicate the allowable range of voltage and frequency variations that the motor can handle without compromising its performance or safety.
    • When selecting a 3-phase motor, it is important to consider the voltage and frequency requirements of the specific application and ensure that the motor’s voltage and frequency ratings align with the available power supply.

Overall, 3-phase motors are designed to handle variations in voltage and frequency within specified limits. They incorporate protective devices and can be paired with control devices such as VFDs to compensate for voltage and frequency fluctuations, ensuring optimal performance and protection against potential damage.

China supplier Ce Approved 0.12kw-315kw Y2 Series Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower   vacuum pump brakesChina supplier Ce Approved 0.12kw-315kw Y2 Series Three Phase Asynchronous Electric Motor AC Motor Induction Motor for Water Pump, Air Compressor, Gear Reducer Fan Blower   vacuum pump brakes
editor by CX 2023-10-23